Hi! I have imported a 3D model of a lens from SOLIDWORKS to Zemax and would like to ray trace it. I am a beginner at Zemax, so I am not sure where to start and how to define the surface, etc..
Thank you!
Solved
Ray tracing on CAD STL files
Best answer by Yang.Yongtao
Hi
what a coincidence! I am also working on the CAD data in Zemax non-sequential , and after several trials, below is what I learned...just for your reference, and let’s wait better answer and try together
1) ensure position of CAD Data in Zemax to match with your optics design
2) set materials of CAD data as in your optics design
3) set coating of CAD data as your optics design
….
by the way you can use this to check the surface
Hi
what a coincidence! I am also working on the CAD data in Zemax non-sequential , and after several trials, below is what I learned...just for your reference, and let’s wait better answer and try together
1) ensure position of CAD Data in Zemax to match with your optics design
2) set materials of CAD data as in your optics design
3) set coating of CAD data as your optics design
….
by the way you can use this to check the surface
Optics is interesting!
1 person likes this
Reply
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Need more help?
To Chinese users:
Do not provide any information or data that is restricted by applicable law, including by the People’s Republic of China’s Cybersecurity and Data Security Laws ( e.g., Important Data, National Core Data, etc.).
不要提供任何受适用法律，包括中华人民共和国的网络安全和数据安全法限制的信息或数据（如重要数据、国家核心数据等）。