Hi there,
I have a VCSEL laser diode with divergence angles of 8 and 24 degrees. I need to collimate the beam. In sequential mode, I set the field according to the angles and used a THORLABS aspheric lens suitable for the laser diode. However, I am unable to achieve collimation for both the 8 and 24-degree angles simultaneously. In theory, the aspheric lens should collimate the beam. How should I simulate this?
+2
Which THORLABS lens did you use (model number)? In addition to the divergence, do you have any information about the spatial light distribution at the VCSEL output? When you say you are unable to achieve collimation, what do you mean quantitatively?
Take care,
David
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Do not provide any information or data that is restricted by applicable law, including by the People’s Republic of China’s Cybersecurity and Data Security Laws ( e.g., Important Data, National Core Data, etc.).
不要提供任何受适用法律，包括中华人民共和国的网络安全和数据安全法限制的信息或数据（如重要数据、国家核心数据等）。