I am new to zemax. My first simple lens design did not show up in the lay out. Please I need help. See the result in attached.
Solved
Simples Lens and layout
Best answer by David.Nguyen
Hi Adewale,
I would advise sharing your file as opposed to a screenshot. You can do this by clicking File..Create Archive, put the *.ZAR file into a *.ZIP that you can upload on the forum.
The Clear Semi-Diameter column seem to indicate all zeros. I would advise to press Setup..System Explorer and under Aperture Type, make sure it is set to Entrance Pupil Diameter, and the Aperture Value is set to something greater than 0.
Finally, if you are begining with OpticStudio, have a look at the Knowledge base articles, which have a wealth of information to offer for every level.
Let me know if this helps, and take care,
David.
+2Hi Adewale,
I would advise sharing your file as opposed to a screenshot. You can do this by clicking File..Create Archive, put the *.ZAR file into a *.ZIP that you can upload on the forum.
The Clear Semi-Diameter column seem to indicate all zeros. I would advise to press Setup..System Explorer and under Aperture Type, make sure it is set to Entrance Pupil Diameter, and the Aperture Value is set to something greater than 0.
Finally, if you are begining with OpticStudio, have a look at the Knowledge base articles, which have a wealth of information to offer for every level.
Let me know if this helps, and take care,
David.
Thanks so much Mr. David, I really appreciate your time and response. However, I couldn’t solve the problem yet. I have created the file as described but I couldn’t attach it here directly. here is the link to my drive simple_lens.
Reply
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Need more help?
To Chinese users:
Do not provide any information or data that is restricted by applicable law, including by the People’s Republic of China’s Cybersecurity and Data Security Laws ( e.g., Important Data, National Core Data, etc.).
不要提供任何受适用法律，包括中华人民共和国的网络安全和数据安全法限制的信息或数据（如重要数据、国家核心数据等）。