Is it possible to truncate the top/bottom of a spherical lens in Zemax?
For example. I would like cut the top/bottom part of a spherical lens to produce a rectangular spherical lens as shown below.
Cheers!
Solved
Truncated Spherical Lens: How to model ?
Best answer by nadav.amitai
Hi,
You can do it with User Defined Aperture (.UDA). See p. 433 in the help pdf file.
Your file should look something like that:
LIN -0.8 0.6
LIN 0.8 0.6
ARC 0 0 73.739 30
LIN 0.8 -0.6
LIN -0.8 -0.6
ARC 0 0 73.739 30
BRK
B.R
Nadav
Hi,
You can do it with User Defined Aperture (.UDA). See p. 433 in the help pdf file.
Your file should look something like that:
LIN -0.8 0.6
LIN 0.8 0.6
ARC 0 0 73.739 30
LIN 0.8 -0.6
LIN -0.8 -0.6
ARC 0 0 73.739 30
BRK
B.R
Nadav
+3Yes, a UDA should do the trick. Additional detail can be found here:
Regards,
Jeff
Jeff.Wilde wrote:
Yes, a UDA should do the trick. Additional detail can be found here:
Regards,
Jeff
Very helpful. Thank you, Jeff.
Hi @Nadav & @Jeff.Wilde: A follow up question, will Zemax capable of producing ISO drawings of reshaped elements ?
Reply
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Need more help?
To Chinese users:
Do not provide any information or data that is restricted by applicable law, including by the People’s Republic of China’s Cybersecurity and Data Security Laws ( e.g., Important Data, National Core Data, etc.).
不要提供任何受适用法律，包括中华人民共和国的网络安全和数据安全法限制的信息或数据（如重要数据、国家核心数据等）。