Hi Elias

I also had a look at your system and I was wondering… What are you trying to optimize? No merit function is defined. If you are working on imaging, I would go back to sequential since it makes things easier for the software. If you can, post a sketch of what you’d like to do and we will be able to guide you a bit further.

I don’t know if you have seen but we have some good tutorials available for a range of subjects: https://www.zemax.com/blogs/free-tutorials

Hi Sandrine!

Thanks for having a look at my system. In the meantime I took Sven’s advice and reduced the number of variables to 4. My aim is to have the same parallel light rays (as sent out by the source) to reach the detector to find compensation lenses for the glass cylinder (see picture below).

I already did many of the tutorials but don`t have sufficient time to do them all and gain enough skills. So I still have problems with defining merit functions. I am working with the “visual optimization” tool at the moment.

I attached the current version of my file.

Thank you for your help :-)

Elias