Dear all,
Please help me to find the resolution of objective lens design in unit lp/mrad?
Thanks
Girish
Solved
Resolution of objective lens design
Best answer by Sandrine Auriol
You will read this value in the MTF plot. The MTF is defined as:
For OpticStudio, modulationobject = 1
So
The MTF plot will give this value for a range of frequencies (cycles or lines per mm).
For more information about the MTF, have a look at Edmund Optics website: https://www.edmundoptics.co.uk/knowledge-center/application-notes/optics/introduction-to-modulation-transfer-function/
In the system explorer, “Units” section, you can switch the “MTF Units” from Cycles/millimeter to cycles/milliradian.
Cycles is the same as line pair.
Thankyou for your reply.
Actually, I am trying to simulate resolution of night vision objective with II Tube with 64lp/mm resolution with SNR 22.
Thanks
You will read this value in the MTF plot. The MTF is defined as:
For OpticStudio, modulationobject = 1
So
The MTF plot will give this value for a range of frequencies (cycles or lines per mm).
For more information about the MTF, have a look at Edmund Optics website: https://www.edmundoptics.co.uk/knowledge-center/application-notes/optics/introduction-to-modulation-transfer-function/
Reply
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Need more help?
To Chinese users:
Do not provide any information or data that is restricted by applicable law, including by the People’s Republic of China’s Cybersecurity and Data Security Laws ( e.g., Important Data, National Core Data, etc.).
不要提供任何受适用法律，包括中华人民共和国的网络安全和数据安全法限制的信息或数据（如重要数据、国家核心数据等）。