Hi,

I strongly recommend you use the API to collect the MTF directly from your model.  It looks like you already know how to interface Matlab to OpticStudio.  This code snippet should help:

analysisCurrent = TheApplication.PrimarySystem.Analyses.New_Analysis(ZOSAPI.Analysis.AnalysisIDM.FftMtf);
settingsCurrent = analysisCurrent.Settings;

settingsCurrent.Field.SetFieldNumber(1);
settingsCurrent.Wavelength.SetWavelengthNumber(1);
settingsCurrent.SampleSize = ZOSAPI.Analysis.SampleSizes.S_128x128;
analysisCurrent.ApplyAndWaitForCompletion;

resultsCurrent = analysisCurrent.GetResults;
dataSeriesCurrent = resultsCurrent.GetDataSeries(0);
frequencySpatial = dataSeriesCurrent.XData.Data.double;
mtfNominal = dataSeriesCurrent.YData.Data.double;

analysisCurrent.Close;

r.frequency = frequencySpatial;
r.mtfNominal = mtfNominal;

Thanks for your help

But what I am currently doing is adding the PSFs of three different wavelengths and plotting the MTF to match Zemax. Is it possible to achieve this with the API?

-shun

The MTF analysis in OpticStudio performs a weighted average of the MTFs at several wavelengths.  So you can configure your wavelengths in your OpticStudio model with equal or specific weighting to achieve the aggregate wavelength weighted MTF. 

Alternatively, you can get the (x3) MTFs at separate wavelengths and then combine then yourself outside of OpticStudio.

If you want to generate an MTF from PSFs, I recommend Goodman’s Introduction to Fourier Optics.  Following the math in that textbook leads you to a 2-D convolution that produces MTFs directly from PSFs.

hi Jeff

I'm sorry for taking so long to get back to you, and thank you for providing me with this method.

It was my fault for not describing my situation properly.

At filed2, I need to move the red and blue lights in the y-direction because the system has lateral color, and only by superimposing them can I obtain a similar  PSF.

Therefore, I need to import each psf.txt file into Excel, combine them with weights, and then import them into MATLAB to convert them into  MTF.

-shun

Hi Jeff

I made some slight modifications to the code you provided in order to achieve my goal. However, the resulting MTF image doesn't match yours. Is it possible that I made an error?

-Shun

Hi Shun,

Check your x & f vectors.  They should be consistent with the PSF sample spacing, which in your file dx = 1 um.  Otherwise, it looks okay.

Regards,

Jeff

Hi Jeff

I can confirm that x is correct, but I am unable to convert it into the correct f .

How do you define your f ?

Thanks for your help

-shun