Hi all,
I am trying to export the lens in the attached file to cad file(step).
I got an error for surface no. 4 -failed to export.
When increasing the clear diameter of the surface to be the same as the mechanical diameter, there is no problem.
Thanks,
Nadav
Hi Nadav,
I was able to export your lens from your file without problems by exporting surfaces 2-5. Your error-code did not occur while I was exporting your lens. My OpticStudio Version used to do this is 22.1.
When opened with a CAD viewer the lens looks fine on first glance. In a second try I also increased the mechanical Semi-Diameter of Surface 4 to 43 mm without increasing the Clear Semi-Diameter and it worked, too.
Best regards,
Sven
Hi Sven,
It is working now after I updated the software to the last vs.
Thanks,
Nadav
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Do not provide any information or data that is restricted by applicable law, including by the People’s Republic of China’s Cybersecurity and Data Security Laws ( e.g., Important Data, National Core Data, etc.).
不要提供任何受适用法律，包括中华人民共和国的网络安全和数据安全法限制的信息或数据（如重要数据、国家核心数据等）。